Coating Applicator Micro Sponge
A must have applicator pad for the UNC range coatings. Achieve 50% product saving when using this applicator.
Max Protect Applicator Micro Sponge.
These are precision laser cut micro sponges especially developed for Ultimate Nano Coat v1, v2, v3 and UNC-R application. They save 50% of the liquid if compared to the round cotton make-up applicators.
How does it work?
The sponge fibres does not absorb the liquid like cotton applicators and many other applicators do. They keep the product "inside" the sponge, and as soon as you place it on the surface and press on the applicator gently, liquid gets released and you spread it evenly with the same sponge.
How many sponges do I need to do the whole car?
You will need only 1 sponge per product - if applying only UNC v1, you can apply up to 3 layers with the same sponge. If applying UNC v1 + UNC v2, we recommend to take a new sponge for UNC v2. After the application the sponges can't be used again as the product will crystallize and the sponges will go rock solid.
Can they be used with other brand coatings?
They certainly can, and not only - they should. Same rule will apply for other good brand coatings - you will save at least 50% of the product and the whole application process with these sponges is much easier, if compared to the round make-up applicator pads.
I dropped my sponge on the floor, should i take a new one?
This is where our applicators really shine - if you drop it on the floor (assuming it didn't fell in water), most of the times you don't need to take a new sponge. Just blow it out with compressed air and you can use it again. Same as with the liquid, dirt does not attract to the fibres like it does with other applicators.
Use these sponges with UNC v1, UNC v2, UNC v3 and UNC-R.
They can be used with many other products and the same rule applies - you will save lots of product as nothing is absorbed in the fibers!