Please wait - it takes a little while to load the catalogue for the first time...

Max Protect was founded to provide a winning mixture of premium quality products and tech support for the professional car detailing industry.

Our vast experience in the bodyworks industry made it possible for us to find products that worked quicker and better than anything else available at that time. Application speed was, and still is important, but we were most concerned with issues like product durability, ease-of-application and ease-of-maintenance. Many products were very good in terms of durability, but for some - maintenance, for some - re-application was an issue. We needed a system that we could use for ourselves on a daily basis. A system that could be easy to apply, required minimal maintenance, could be re-applied with minimal prep if necessary and could withstand even the harshest real life conditions.

After years of trial and error we finally have it! A paintwork protection system that can be used in any climate, doesn’t require specialist equipment like IR lamps or bake ovens, works on many surfaces, including metal and plastic, is extremely durable and easy to clean.

Max Protect products are used by professionals and DIY Enthusiasts alike worldwide. All sharing great results and providing vital feedback on the system and application.
The system was designed and is best suited for car detailing professionals, but a skilled DIY Enthusiast will have no problems applying most of the products, in normal home conditions, after learning the application instructions.

For car detailing professionals, these products offer unrivalled value for money. Can be applied in wide temperature ranges (+3.5c - +40c and above) and are one of the easiest products to apply, still offering exceptional durability and easy maintenance.

Share our experience and become a part of our growing family!

Max Protect Ltd – London, UK | Office: +44 7861 709 734 | email: info@max-protect.co.uk

Slow Ceramic Coating / Nano Primer

The original and best of its class – Max Protect Ultimate Nano Coat v1.

UNC v1 is a permanent Ceramic Nano-Glass coating and will bond to most surfaces of the vehicle. Paintwork, plastic trim, rubber, metal, vinyl, PPF, Perspex glass, wheels, exhausts, chrome, etc., can all be protected with a simple application of Ultimate Nano Coat v1.

UNC v1 is a slow flashing-off coating, is very easy to apply and is proven to be very effective if applied as first layer prior to UNC v2 or UNC v3 application. Most of the coating is absorbed by the surface creating a base layer inside the surface, but leaving very think layer above, therefore 2 layer application is recommended.

Adds deep gloss to the paintwork and makes it super easy to clean, restores plastic trim back to the original color without making it shiny. All protected surfaces are water, oil and dirt repellent and totally sealed. Perfect for hotter climates like Southern Europe, California, Middle East, etc

Packing Sizes

30ml

Durabbility

6 out of 10

Ease of Application

2 out of 10

Gloss enhancement

7 out of 10

Consumption

3ml/m2 – 25ml/car

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Fast Ceramic Coating

UNC v2 is extremely durable Ceramic Nano-glass coating with outstanding resistance to chemical attacks – salt, acid rain, heavy detergents like TFR, wheel cleaner, bird poo, tree sap, etc.

UNC v2 is one of the hardest and glossiest coatings in the range and is more suited for the professional, but a skilled DIY enthusiast can handle it after studying the application instructions.

All surfaces treated with UNC v2 are totally sealed and dirt/oil/water repellent. This coating adds ultra-deep gloss with mirror like reflections, slightly darkens the paint, and improves deep scratch resistance. UNC v2 and is so super-hydrophobic, some of our customers say it’s difficult to get the car wet!

For maximum durability we recommend to apply UNC v2 over a semi-cured layer of UNC v1, but it is perfectly fine to use as a stand-alone product - perfect for professionals looking for outstanding performance, looks, speedy application and curing time.

Packing Sizes

30ml

Durabbility

8 out of 10

Ease of Application

6 out of 10

Gloss enhancement

9 out of 10

Consumption

3ml/m2 – 25ml/car

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Bare Metal & Matte Paint Coating

UNC v3 is a Ceramic Nano-Coating best suited for bare metal, ceramics and other dense surfaces. It comes from the same series as UNC v1, UNC v2, but is modified to perform best on bare metal. Perfect for exhaust tips, bare metal wheels - polished aluminum, chrome, steel, etc. chrome, nickel, brass, copper or any other bare metal trim.

We highly recommend using UNC v3 for satin/matte finish painted alloy wheel protection. It is not as glossy as UNC v2, but adds a beautiful glow to satin paint. Can be used on satin metal/ foil/ chrome vinyl wraps.

This product will stop bare steel from rusting, aluminum from oxidizing, and will make these surfaces incredibly easy to clean! For Maximum durability we recommend to apply it in 2 layers – leave at least 12h between the layers.

Perfectly suited for the professional, but a skilled DIY enthusiast will be able to handle this, once familiar with the application instructions.

Available only from Max Protect and authorized distributors.

Packing Sizes

30ml

Durabbility

9 out of 10

Ease of Application

7 out of 10

Anti-Static

YES

Consumption

5ml/m2

Anti-Rust

YES

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Fast Flexible Membrane Coating

Once in a decade a new product emerges and astonishes the car care products market! UNC-R was the first coating in the world that turns into flexible rubber membrane when applied in non-lab conditions and cured in room temperature!

Perfectly suited for Paint, Vinyl and Paint Protection Film applications  – extremely glossy and silky smooth surface with no top-ups. Ultra high chemical resistance (more resistant than UNC v2). UNC-R increases paintwork resistance against small washing scratches (light swirls) is super hydrophobic (oil water and dirt repellent), therefore very little sticks to a treated surface.

Has great stone-chip and light scratch filling abilities. If layered, each layer will mask more defects, therefore for poor quality pain/vinyl 2 layers are recommended.

UNC-R is a professional ONLY product and is known to be temperature sensitive, always check if it is not too hot to apply this product.

Available only from Max Protect and authorized distributors.

Packing Sizes

30ml

Durabbility

10 out of 10

Ease of Application

8 out of 10

Gloss enhancement

10 out of 10

Consumption

3ml/m2 – 25ml/car

Market

PRO only
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Fast Flexible Membrane Coating

Once in a decade a new product emerges and astonishes the car care products market! UNC-R was the first coating in the world that turns into flexible rubber membrane when applied in non-lab conditions and cured in room temperature!

Perfectly suited for Paint, Vinyl and Paint Protection Film applications  – extremely glossy and silky smooth surface with no top-ups. Ultra high chemical resistance (more resistant than UNC v2). UNC-R increases paintwork resistance against small washing scratches (light swirls) is super hydrophobic (oil water and dirt repellent), therefore very little sticks to a treated surface.

Has great stone-chip and light scratch filling abilities. If layered, each layer will mask more defects, therefore for poor quality pain/vinyl 2 layers are recommended.

UNC-R is a professional ONLY product and is known to be temperature sensitive, always check if it is not too hot to apply this product.

Available only from Max Protect and authorized distributors.

Packing Sizes

30ml

Durabbility

10 out of 10

Ease of Application

8 out of 10

Gloss enhancement

10 out of 10

Consumption

3ml/m2 – 25ml/car

Market

PRO only
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Slow Flexible Membrane Coating

UNC-R 1.5 is a slower version of our incredible flexible membrane coating UNC-R. It is a permanent nano rubber coating designed specifically for hotter climates. Can be appied in temperatures of up to +40c This flexible nature enables the finish to be ultra-resistant to wash swirl mark build-up* and does not suffer from hard water spotting like some ceramic coatings do. 

The perfect choice for satin/matte vinyl or paint protection film applications. Slower flash-off times enable the coating to be spread evenly and removed easily without streaks or patches. For Satin/Matte finish a single layer is recommended, for gloss finish 2 layers are recommended.

Incredibly glossy, super smooth and easy to clean surface is what UNC-R 1.5 is about. Recommended to apply at temperatures below +40c, with perfect application temperatures from +10c to +25c. If you live in a hot country, please check if your temperatures are not too hot to applky this product, if temperature is above +40c, you UNC-R 1.5 can be applied in sections. 

Packing Sizes

30ml

Durabbility

8 out of 10

Ease of Application

10 out of 10

Gloss enhancement

9 out of 10

Consumption

3ml/m2 – 25ml/car

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Hard Water Spot Remover

Hard water stains or spots on paint, metal, plastics and glass are a well-known problem. Max Protect Water Spot Remover is an amazing product that will save lots of time and headache when fighting hard water stains. It's super powerful, yet 100% non-abrasive formula, ensures that water spots can be removed without damaging the finish even on high gloss finishes, stainless steel, glass, etc.

Water Spot Remover is super effective if used on glass and is our recommended pre-treatment prior to UGC PRO Windscreen and glass coating application. Leaves a crystal clear finish and beads naturally as glass is so clean after WSR treatment - effect lasts up to 2 weeks. 

Warning - Never leave anything soaked in WSR on the surface for prolonged periods of time. When cleaning glass, do not leave it on for more than 1 minute, WSR is super powerful and can stain surface.

Packing Sizes

1000/100/500ml

Ease of Use

5 out of 10

Efficiency

10 out of 10

Works Best On

Bodywork, Clearbra, Glass, Metal, Pain

Consumption

5ml/m2

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Quick Detailer & Hydrophobic Top-up

Silk Coat was originally developed as a protective layer for UNC v1 and UNC v2 while they are curing, in case you had to drive the car in rain straight after the application. But after prolonged testing we found that the extra slickness and hydrophobic properties this product added were so impressive, we decided to recommend Silk Coat as part of the coating application. Apply it straight after UNC v1, UNC v2, UNC-R or any other coating in our range.

For for best results, apply it 12 hours after the coating application.

Silk Coat adds incredible smooth feel to the surface, improves hydrophobic properties and adds an extra depth and shine to the finish and has anti-static properties. Silk Coat is the only product you will ever need to maintain the UNC Range coatings! We recommend applying Silk Coat every 4-6 months on top of our ceramic or flexible membrane coatings, or use it as often as you want - impossible to overdo it!

Packing Sizes

1000/100/500ml

Durabbility

5 out of 10

Ease of Application

1 out of 10

Gloss enhancement

9 out of 10

Consumption

25ml/car

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Carpet & Convertible Roof Coating
Ultimate Fabric Coat offers long term protection for fabric seats, carpets, upholstery and any other fibrous materials. It does this by coating each individual fiber without forming a film above the surface, which allows treated surfaces to be cleaned without damaging the coating. Ultimate Fabric Coat has very good resistance to abrasion (wear) and if applied on synthetic textiles, this product can withstand up to 20 wash cycles in a +30c wash program. Super effective and easy to use – spray on coating – fully cures in 30 minutes in room temperature. Please ensure sufficient ventilation when applying this product. Protective wear (gloves, mask) is also recommended to use when applying this product

Packing Sizes

100/200ml

Durabbility

8 out of 10

Ease of Application

1 out of 10

Anti-stain

10 out of 10

Consumption

100ml/ m2 500ml/car

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Rain Repellent Windscreen Coating
Max Protect Ultimate Glass Coat PRO is a SOLGEL based product and is best known for its extreme durability and effectiveness. It’s a permanent glass coating for the professional market, but a skilled DIY guy will handle it with no problem. Extreme durability - proven to last for up to 20,000 miles or 2 years of driving. Extremely resistant to mechanical abrasion (wiper blades) and chemical attacks – pretty much nothing can remove this coating once fully cured. Dramatically improves visibility and improves safety when driving in poor weather conditions, especially at night time. When driving above 50MPH raindrops form into nice little water beads and the airflow pushes them off the glass. Furthermore ice, dirt and insects don’t stick to the glass and cleaning the windows is very easy.

Packing Sizes

100/30ml

Durabbility

10 out of 10

Ease of Application

7 out of 10

Visiblity Improvement

10 out of 10

Visiblity Improvement

10 out of 10

Consumption

5ml/ m2 25ml/car

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Natural Look Tyre Gel

Does what it says on the box – a natural finish tyre shine.
Quick and easy application – wipe on and wipe off (if any excess left). Ultimate Tyre Gel is significantly low consumption and is one of the most durable tyre dressings out there.
Keeps tires looking fresh for months, is not affected by heat, so even in hotter climates it won’t just simply melt off like many other silicone products do.
Can be applied on rubber trim and plastic trim as well (semi-permanent).
For permanent plastic and rubber trim restoration please use UNC v1, UNC v2 or UNC-R.

Packing Sizes

100/250/50ml

Durabbility

8 out of 10

Ease of Application

2 out of 10

Gloss enhancement

Natural Look

Consumption

3ml/tire

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Heavy Duty Leather & Carpet Cleaner

Max Protect HDLCC was designed to combine strong cleaning capabilities in a safe formula. It is perfect to use for heavy stain cleaning, but also amazing for regular maintenance. Highly concentrated - dilute 50:50 for super cleaning power - blood, vomit, fat, rust, oil, etc. is all easy to fix with HDLCC. 1:20 for regular carpet & leather cleaning, 1:80 for regular maintenance cleaning.

 

For painted leather try on a small patch in a difficult to see area first to see if paint is not coming off, if it is, dilute more or use plain water.

 

HDLCC is our recommended cleaner prior to Ultimate Leather Coat application.

 

Packing Sizes

1000/100/250/500ml

Efficiency

10 out of 10

Ease of Application

5 out of 10

Anti-Static

YES

Consumption

20ml/m2

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty
Applicator Micro Sponge

Precision laser cut micro sponges especially developed for Ultimate Nano Coat v1, v2, v3 and UNC-R application. They save 50% of the liquid if compared to other coating applicators.

The sponge fibers do not absorb liquid like cotton, suede or other materials. Liquid is kept "inside" the sponge, and as soon as you place it on the surface and press on the applicator gently, liquid gets released and you spread it evenly with the same sponge. If the sponge is feeling very "grippy" and wants to turn over, you need to add more product. If primed correctly it glides above surface very easy and will not scratch the surface.

A must have product to achieve 1-2ml per m2 UNC product usage. Can be used with other brand to achieve the same savings in product usage.

Packing Sizes

10/5pcs

Ease of Use

1 out of 10

Product Saving

10 out of 10

Durabbility

10 out of 10

Consumption

1 sponge/car

Market

PRO and DIY
1 - Lowest score/difficulty, 10 - higtest score/difficulty