Best Value Ceramic Coating for Professionals!
Ultimate Nano Coat v2 is our most durable Nano Glass Coating with outstanding resistance to chemical attacks – salt, acid rain, heavy detergents like TFR, wheel cleaner, bird poo, tree sap, etc., will not harm the protected surfaces* All surfaces protected with Ultimate Nano Coat v2 are totally sealed and dirt/oil/water repellent.
To the paintwork, UNCv2 adds ultra-deep gloss with mirror like reflections, protects it from chemical attacks, improves scratch resistance and is so super-hydrophobic, our customers say it’s difficult to get the paint wet!
Restores plastic trim back to the original colour and adds a lovely satin look to the plastics.
Ultimate Nano Coat v2 is best suited for professionals, but in temperatures below 15 C, it could be applied by a skilled DIY man with no issues. This rapid curing and flash-off period (6 hours for UNCv2 in comparison with 48 hours for UNCv1) enables a much thicker layer build-up.
Perfectly suited for British climate and all other countries with similar weather conditions. For really hot places like Southern Europe, California or Middle East, we recommend Ultimate Nano Coat v1.
Thanks to the state of the art human engineering, UNC v2 is not damaged by sun’s UV and IR rays and has very strong UV filters built in. The coating will perform equally well in acidic or alkali conditions.
How does it work?
The coating consists of Nano scale particles, which are so tiny they can penetrate the surface and fill all the pores and cracks. Once all the pores and cracks are filled, the surface is totally sealed from inside and tiny dirt particles, brake dust, tree sap, etc. can no longer contaminate s. A totally sealed surface has no rough edges (tiny cracks or pores) which ensures it will stay cleaner for much longer and once it gets dirty, cleaning is very easy and most of times does not require the use of any detergents. However, we recommend using tiny amounts of car shampoo to lubricate the surface when washing the car – that will keep swirl mark build up to the minimum.
For best results on paintwork, the surface has to be machine polished before Ultimate Nano Coat v2 application. We recommend using oil/wax/filler free polishing compounds, or polishes with minimal amounts of oils/waxes/fillers in the content. After polishing the paintwork has to be degreased with panel wipe or IPA. This will ensure perfect adhesion conditions for the coating.
My car is brand new; do I still need to machine polish it?
If the car is brand new you need to make sure the surface is oil/wax/grease free before coating application. In most cases a good brand panel wipe will be enough to prepare the paintwork.
However, every car dealership will normally put some sort of wax on the car, and therefore, we recommend to perform a light machine polish of the paintwork if possible. Although the cars are new, they always look so much glossier after a quick machine-polish.
Where can I get it applied?
Max Protect is proud to offer a bespoke detailing service in the London Area. Our premises are in Kings Langley – 1 mile from j20, M25. A1, M1, M4 and M40 motorways are within 20 min reach from us.
If you are too far from us, please see this section to find a detailer near you: Contact Us
* We do not recommend to use any of the mentioned chemicals or any other chemicals to test the coating’s performance and will not be held responsible for any damage caused by such action.