UNC-R LITE (formally known as UNC-R 1.5) is a slower version of our incredible flexible membrane coating UNC-R. It is a permanent nano rubber coating designed specifically for hotter climates. Can be appied in temperatures of up to +40c This flexible nature enables the finish to be ultra-resistant to wash swirl mark build-up* and does not suffer from hard water spotting like some ceramic coatings do. Much easier to apply than UNC-R or PRO ELITE.
The perfect choice for satin/matte vinyl or paint protection film applications. Slower flash-off times enable the coating to be spread evenly and removed easily without streaks or patches. For Satin/Matte finish a single layer is recommended, for gloss finish 2 layers are recommended.
Incredibly glossy, super smooth and easy to clean surface is what UNC-R LITE is about. Same as our Nano Glass Coatings, UNC-R LITE is a permanent coating and can only be removed with sand paper once fully cured. Has extremely high chemical resistance (Salt, Acid, Brake Dust, Exhaust Gasses, Tree-Sap, etc.) and high UV filtering properties.
Recommended to apply at temperatures below +30c, with perfect application temperatures from +10c to +25c. If you live in a hot country, please check if your temperatures are not too hot to applky this product, if temperature is above +40c, you UNC-R 1.5 can be applied in sections.
This is a Professional product and is not recommended for beginners. However, a seasoned DIY Enthusiast could handle it after learning the application instructions.
Available only from Max Protect and authorized distributors.
* Good care guidelines have to be followed to achieve no wash swirl build-up.